10 Best Aluminum Fishing Boats 2021

Gareth Otwell Reviewed by Gareth Otwell | Last Updated:

Pelican – ⭐ Best Overall Aluminum Fishing Boat

BJA12P105-00 by Pelican

  • Release date: 11/01/2019
  • Color: Khaki / Beige
  • Weight: 129.75 pounds
  • Dimensions: 144 x 48 x 16.8 inches
  • Warranty: 2-YEAR LIMITED WARRANTY
Pelican
  • Four vertical rod holders Perfect place to store and position fishing rods. Can be used for trolling or multi-rod fishing.
  • Bench seats built-in motor mount
  • Shallow draft design; flat hull for maximize stability
  • Multiple storage compartments to store all your fishing gear for your trip on the water
  • Carrying handles to easily carry your boat to the water - oar lock receptacle

Classic Accessories Colorado Pontoon Boat

69660 by Classic Accessories

  • Color: SAGE /BLACK
  • Weight: 71.5 pounds
  • Dimensions: 108 x 26 x 56 inches
  • Warranty: 2 Year
Classic Accessories Colorado Pontoon Boat
  • Colorado assembled size 108"L x 56"W x 26"H (to top of seat), Weight: 71.5lbs.
  • Two-year limited warranty
  • Heavy-duty pontoon boat with abrasion-resistant PVC bottom, tough nylon top, powder-coated steel tube frame, bronze oarlocks, cold and heat-resistant bladders, and rugged 7 foot two-piece aluminum oars
  • High storage capacity; includes 10 mesh pockets, 12 zippered pockets and 2 insulated drink holders
  • Safety features include labeling as per ABYC standards, pontoon boat rides high for improved visibility, tow rings, non-slip footrests and unique dual-side stripping apron with fish ruler allows entry and exit without unclipping

PLUSINNO Fishing Boat Rods Holder with Large Clamp Opening 360

BFH002-2PACK-FBA by PLUSINNO

  • Release date: 06/28/2018
  • Color: RH20 MAX OPENING 1.97 inch 2PACK
  • Weight: 2.4 pounds
PLUSINNO Fishing Boat Rods Holder with Large Clamp Opening 360
  • 🎣【Clamp Max. Opening 1.97 Inch. 2Pack】- Include 2 Pcs Fishing Pole Boat Holders. Please kindly check your boat board size before buying.
  • 🎣【Eco-friendly Material & Anti-Corrosion】- This fishing boat rod holder is totally made of high quality and eco-friendly material--strong & anti-corrosion, constructed with high impact resistant heavy duty ABS.
  • 🎣【Universal Fit】- Accommodates Spinning, Casting and Spincast rod handles,360 degree adjustable,Rod Holder makes it easy to access your rod and put it into the perfect position.
  • 🎣【High Impact Resistant Construction】- The construction is very easy to hold on the boat or kayaks which is very steady. Great fishing rod holders for boats or kayaks, includes stainless steel hardware.
  • 🎣【Best Gifts Choice】: It's the best gift to send father, son, husband, fiancé, boyfriend for the upcoming Christmas.

Intex Excursion 5

68325EP by Intex

  • Release date: 01/01/2016
  • Color: White
  • Weight: 55.12 pounds
  • Dimensions: 24 x 12 x 22 inches
Intex Excursion 5
  • 3 air chambers including an auxiliary air chamber in hull for extra buoyancy
  • Boston valve on 2 main hull chambers for quick-fill & fast-deflate; All around grab line
  • Inflatable I-Beam floor for comfort and rigidity; Has 2 welded oar locks on each side
  • Motor Mount Fitting; Hi-Output Manual Hand Pump; 54 inch deluxe aluminum oars; Item is 144.09 long x 66.14 wide in inches
  • Boston valve on 2 main hull chambers for quick-fill & fast-deflate; Do not inflate in 30 minutes after patching

Attwood 15700-3 Seat Mount – 💲 Best Budget Aluminum Fishing Boat

15700-3 by attwood

  • Release date: 08/02/2010
  • Color: Unspecified
  • Weight: 8.6 pounds
  • Dimensions: 15 x 7 x 9.5 inches
Attwood 15700-3 Seat Mount
  • Swivel action seat mount can accept seats with all the most popular mounting hole patterns
  • Durable aluminum construction with a black powder-coated finish
  • Adjusts from 7 ½ inches to 18 inches
  • Versatile mount is ideal for use in Jon boats
  • Meets ABYC Code B

SEAMAX Easy Load Boat Launching Wheels Set for Inflatable Boat

EZ-Load by Seamax

  • Weight: 14 pounds
  • Dimensions: 26 x 5 x 16 inches
SEAMAX Easy Load Boat Launching Wheels Set for Inflatable Boat
  • Seamax Easy Load Boat Launching Wheels Set is designed by Seamax Canada, made by hardest marine grade T6 aluminum alloy with CNC processing; Shiny looking anodized coating on all aluminum parts, product is good for saltwater using; Small parts are all made by solid stainless steel. Lab 1000Lbs tested, support MAX 500Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats.
  • This system is designed for boats with transom, the length of the boat should not exceed16 FT & total weight within 500 Lbs. These transom wheels should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 4 holes (5/16”) in the transom for the mounting. Addition reinforcement may be required on some aluminum transom. And you can use marine sealant and suggested Sikaflex 291.
  • Benefit from its new Push Button design & max 3 stages wheel arm, the system can be adjusted while afloat in the boat leaving or coming into, it can also bring different performance position for boat launching. The wheel arm length increment is 2.5” per stage, plus the wheel’s diameter, the range of length is 22-28 inches.
  • Tire inflation: Dolly tires may not be fully inflated when shipping; please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inflated. Tire over inflated will cause damage and the warranty is not covered. Dual wheel kit is available for this dolly for heavy loading application.
  • Maintenance: Wash it after using from salt water or sandy beach. Check tire pressure before every using. Don’t store the wheels under the sun or beside the heat to maximize its life time. Take the wheel arm off from the transom bracket when store your boat. Lube the spring load dolly system is necessary. Keep the lock pin on the dolly bracket. Manufacturer 2 years Parts Limited Warranty within USA & Canada. 30 days free replacement on any defective ransom wheel sets.

Classic Accessories StormPro Waterproof Heavy-Duty Boat Cover

88908 by Classic Accessories

  • Color: Charcoal
  • Weight: 3.04 pounds
  • Dimensions: 178 x 74 x 12 inches
  • Warranty: Manufacturer Warranty
Classic Accessories StormPro Waterproof Heavy-Duty Boat Cover
  • For smaller utility and fishing boats 12' 14' long, up to 68 inch beam width
  • Heavy duty 600D boat cover designed for both long term storage and highway travel
  • Integrated buckle and strap System for easy fitting and trailering, adjustable straps snap into quick release buckles on the cover
  • Includes stuff sack storage bag, cover support pole to prevent water pooling, and trailering straps
  • Five year limited Warranty

Marinebaby Fishing Rod Holder (Holds 4 Rods) Aluminum

by Marinebaby

Marinebaby Fishing Rod Holder (Holds 4 Rods) Aluminum
  • 【Super light but Heavy Duty】- Made of Aluminium , Withstand Harsh Marine Conditions , for Longer Service Time
  • 【Rubber Insert】- white plastic liner that would protect fishing rod surface avoid scratched or mar
  • 【4 Brackets in One】- Ideal for professional anglers with multiple fishing rods
  • 【Dimensions】- Width : 17-1/8" (435mm) , Height : 8-2/3"(220mm)
  • 【Security Insurance】- Rolled top and bottom edges - no sharp edges; Solid construction

Marinebaby Fishing Rod Holder (Holds 3 Rods) Aluminum

by Marinebaby

Marinebaby Fishing Rod Holder (Holds 3 Rods) Aluminum
  • 3 racks rod holder
  • Material : Aluminum, Super light but Heavy Duty
  • Gimbal pin rod stopper, Solid construction - no moving parts
  • Rubber Insert to protect your fishing rod from any wear against the aluminium surface
  • Width : 11-1/2" (290mm) , Height : 8-1/2"(216mm)

Emaxusa Inflatable Boat Aluminum Floor Aluminum Transom 4 Person Professional – 👑 Premium Pick

by Emaxusa

  • Color: Red
Emaxusa Inflatable Boat Aluminum Floor Aluminum Transom 4 Person Professional
  • 【HIGH QUALITY MATERIAL】Made with US Coast Guard rated 3x layer .9mm/1100D diner coated PVC. Features durable marine aluminum floors with aluminum framing for outboard motor, double layers of fabric at the bottom of the tubes.
  • 【MULITY PURPOSE USE】Our inflatable boats are all heat welded seaming and guaranteed to last in both fresh and saltwater environment. It is ideal for rough ocean water, emergency situations, tendering, fishing, or on a calm rivers, lakes and bay.
  • 【SAFETY FEATURES】Sturdy carrying handles, all around rope grab line, separate internal air chambers, one way drain valve with plug, all around durable rubber strike, safety valve to prevent over inflation, and more.
  • 【EASY & PORTABLE】Incredibly portable and easy to assemble or dissemble in 10 minutes. The inflatable boat is an incredibly compact, portable and storable boat when deflated for storage.
  • 【30-DAYS GUARANTEE】We inspect all units before we list them and will double check it before ship it out. We will exchange for the parts in 30 days. California based customer service team for reliable after sale support.so you can buy with confidence! Our boats come manufacturer's warranty, and we stand behind our products 100%.

Similiar Categories