It continues the compact and lightweight concept but with a new generation of 4 in 1 multifunction tester: Automotive Diagnostic, oscilloscope, signal source and multimeter;
A small volume of the non-profit grip by a single hand; The suspendingstand was designed to support multi-angle adjustment;
Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months;
High-definition color LCD screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use.
The product is 100% brand new and high-quality. We care for every customer’s feeling. You can get in touch with customer service when you meet any question.
New Hantek 1008c 8CH Automotive Diagnostic 2.4MSa/s PC Oscilloscope 8
Contains information for most domestic vehicles as well as many imports
Recommends the appropriate test procedures for fast accurate repairs
Visible on the screen are diagrams showing pin numbers and wire colors for both the PCM and the component connector
Powerful built-in reference information for each preset test include a test procedure normal reference signal pattern theory of operation and trouble shooting tips
Heavy-duty stainless steel probe with insulated shaft and heavy-duty clip with positive soldered connection
LIUMY Oscilloscope Multimeter
– 💲 Best Budget Automotive Lab Scope
▼FASTER SAMPLING SPEED - 2.5Mpsp high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency.
▼MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40MΩ, Capacitance 0 ~ 100μf, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50Ω. Transistor amplification test to meet all test requirements.
▼MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately.
▼LED BACKLIGHT & STORAGE / READOUT - Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlighting. More clear and suitable for working at night.
▼OVERLOAD PROTECTION & MULTI-PURPOSE - Built-in 500mA/10A double protective tube, dual protection of the instrument. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety.
EXTENSIVE COVERAGE: With Free MV108, Autel MaxiScope MP408 measures and tests virtually all the electrical and electronic components and circuits in most modern vehicles. In addition, it can be used in a wide range of industries related with electronic signals.
4-CHANNEL PANEL: This advanced automotive oscilloscope features color coded 4-channel control panel for fast sampling, making it a complete electronics lab in one compact, low-cost, USB-powered unit.
READ & DISPLAY: Featuring one-click auto setup of the voltage scale and time base, Autel MP408 is compatible with LIN, CAN and FlexRay data bus standards to read and display electrical signals in high resolution waveforms.
INTUITIVE UI DESIGN: It features easy trigger point adjustment and real time scale info display that ensures you can effortlessly capture every detail of the signal. Also, it allows manual editing of measurement parameter display.
VERSATILE & PORTABLE: Power for the MaxiScope MP408 comes directly from the USB port of the connected PC, so no batteries or power leads are required, making the system very versatile and portable to use.
Mrcartool Hantek 1008C 8Channel Automotive Diagnostic PC Digital Oscilloscope/DAQ/Programmable Generator
[Intelligent] Under the network environment, you can operate the oscilloscope remotely via connecting the smartphone APP, which can help you observe the real-time waveform and data. If the Wi-Fi signal is stable, waveform and data transferring process make you work effectively.
[Applications] The ATO1104 supports the various automotive diagnostic test: ignition, sensors, actuators, networks, charging circuit, starter circuit, communication test (including CAN, LIN, FlexRay, K, etc. ), and pressure test(cylinder pressure, intake and exhaust pressure, fuel pressure, etc. )
[Simple to Use] Featured with an 8" full touch capacitive screen, the operation is simple and easy.
[Easy Saving] The built-in 8 G memory storage makes saving and transferring waveform images, videos and data easier than ever.
[Various I/O port] Wi-Fi, LAN, HDMI, USB Host, USB Device, GND, DC Power.