10 Best Ball Joints 2021

Gareth Otwell Reviewed by Gareth Otwell | Last Updated:

Detroit Axle – ⭐ Best Overall Ball Joint

80026-16B by Detroit Axle

  • Weight: 70 pounds
  • Dimensions: 30 x 15 x 25 inches
Detroit Axle
  • Both (2) Front Upper Suspension Control Arms
  • All (4) Front Upper & Lower Suspension Ball Joints
  • Both (2) Front Wheel Hub and Bearing Assemblies
  • All (4) Front Inner & Outer Tie Rod End Links + 2 Tie Rod Boots
  • Both (2) Front Stabilizer Sway Bar End Links

MOOG K9513 Ball Joint

K9513 by MOOG Steering & Suspension

  • Weight: 0.85 pounds
  • Dimensions: 0.4 x 1.7 x 0.4 inches
  • Warranty: Limited Warranty
MOOG K9513 Ball Joint
  • STRONG & DURABLE - Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates

MOOG K7460 Ball Joint

K7460 by MOOG Steering & Suspension

  • Release date: 09/26/2013
  • Color: Regular
  • Weight: 1.2 pounds
  • Dimensions: 5.4 x 3.4 x 2.8 inches
  • Warranty: Limited Warranty
MOOG K7460 Ball Joint
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG & DURABLE - Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates

MOOG K80149 Ball Joint – 💲 Best Budget Ball Joint

K80149 by MOOG Steering & Suspension

  • Release date: 09/26/2013
  • Color: Regular
  • Weight: 1.6 pounds
  • Dimensions: 5.4 x 3.3 x 2.8 inches
  • Warranty: Limited Warranty
MOOG K80149 Ball Joint
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG & DURABLE - Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates

MILLION PARTS 11 Pcs Front Lower Upper Control Arm Ball

MP-KZBKit-0019 by MILLION PARTS

  • Dimensions: 13.8 x 6.7 x 11.8 inches
MILLION PARTS 11 Pcs Front Lower Upper Control Arm Ball
  • Placement on Vehicle: Front
  • Interchange Part Number: K8695T K8722T K8724T K8772
  • Anticorrosive coating extends the service life on the Suspension Parts
  • Powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
  • NOTICE - PLEASE PUT YOUR VEHICLE MODEL in "Your Garage" on Amazon website and it will verify the fit. Please contact us if you have any question regarding our this product

MOOG K500008 Ball Joint

K500008 by MOOG

  • Release date: 09/26/2013
  • Weight: 1.61 pounds
  • Dimensions: 5.4 x 3.3 x 2.7 inches
  • Warranty: Limited Warranty
MOOG K500008 Ball Joint
  • PROBLEM SOLVER GUSHER BEARING - Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG and DURABLE  – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET - Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT - Pre-installed dust boot shields socket components from wear-causing contaminants
  • ABSORBS IMPACT - Belleville preload washer helps keep the bearing package tight as bearings wear
  • EASY TO INSTALL - Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE - Available for foreign and domestic nameplates

OEM TOOLS 25104 21 Piece Master Ball Joint Press Kit – 👑 Premium Pick

25104 by OEM TOOLS

OEM TOOLS 25104 21 Piece Master Ball Joint Press Kit
  • BALL JOINT REMOVAL KIT: Our ball joint tool kit installs and removes press-fit upper and lower ball joints on 2-wheel drive and 4-wheel drive vehicles; Ball joint removal tool also works as a U joint removal tool and a brake anchor pins removal tool
  • WORKS WITH VARIOUS MODELS: This ball joint puller tool includes adapters for removing upper and lower ball joints on GM, Ford, and Chrysler 2-wheel drive and 4-wheel drive light-duty trucks, vans, and SUVs
  • MANEUVERS AROUND OBJECTS: The adapters in this ball joint remover kit feature specialized cut-outs that are designed to fit or maneuver around obstructions found on many common makes and models, saving you time and effort
  • HEAVY DUTY BALL JOINT PRESS: Our ball joint separator kit has a C-frame that is constructed with a durable steel alloy for the toughest ball press jobs, making this ball joint tool set ideal for removing seized joints
  • CONVENIENT STORAGE: This ball joint kit comes in a sturdy blow-molded case for secure storage in your garage or auto shop until you need it; Easily take your ball joint adapter kit with you from job to job

Iconic Racing Front Ball Joint Joints Set Upper and Lower

701088-RR9x4 by Iconic Racing

Iconic Racing Front Ball Joint Joints Set Upper and Lower
  • Compatible with: Polaris 13-16 Ranger 900 XP / 11-14 Ranger 900 Diesel / 12-14 Ranger 900 Diesel Crew / 14-16 Ranger 900 Crew
  • 4 Ball Joints / 1 Iconic Racing Sticker
  • Exact replica replacement for OEM Polaris part numbers: 7061220 / 7081924
  • Great Quality that exceeds industry standard specs

AUTOSAVER88 10PCS

ATCAA029 by AUTOSAVER88

  • Warranty: AUTOSAVER88 warrants AUTOSAVER88 product(s) 12 Months or 12,000 Miles (20,000 kilometers) Limited Warranty! (Whichever occurs first)
AUTOSAVER88 10PCS
  • [Compatibility] - Control arm assembly compatible with 1998-2011 Ford Ranger 2WD with 2.3L/2.4L L4 or 3.0L/4.0L V6 engine; 2001-2003 Mazda B2300, 1998-2001 Mazda B2500, 1998-2004 Mazda B3000, 1998-2003 Mazda B4000 - 1-pc design w/Front Coil Susp. ONLY
  • [OE Replacement] - Designed and manufactured to directly replace OE parts for proper fit and alignment. Directly replaces OEM #: 1F7134211, ZZP134211A, 1F7135211, ZZP135211A, 2L2Z5K483BA, 6L5Z5495AA, 1F703224X, 9L5Z3280A, 5L5Z3A130AA, F87Z3050BA, ZZP134550
  • [Durability and Strength] - Our control arms are forged from a solid piece of steel and are electrophoretic coated for unrivaled durability and strength. Greaseable parts are pre-greased requiring no additional work
  • [Package Content] - 2× front upper control arm with ball joint, 2× front stabilizer/sway bar link kits, 2× front lower ball joint, 2× outer tie rod end, 2× inner tie rod end
  • [Attention] - Be sure to verify vehicle compatibility using the “Amazon Parts Checker” or refer to the "Product Description"
  • Fit type: Vehicle Specific

Detroit Axle

80016-14 by Detroit Axle

  • Weight: 14 pounds
  • Dimensions: 16 x 4 x 12 inches
Detroit Axle
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information
  • Kit Includes: Sway Bar, Tie Rods, Idler Pitman Arm, Ball Joints, Adjustment Sleeves
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability
  • 10 Year Warranty

Similiar Categories