This premium, interior/exterior paint is formulated to waterproof and seal porous concrete and masonry surfaces both inside and outside your home.
Using nanotechnology, this paint forms a barrier to help stop water infiltration while an alkali resistant coating provides a long-lasting, durable and decorative finish.
Apply this paint on properly prepped and cured above and below grade basement walls, masonry walls, retaining walls, cinder and concrete blocks, stucco and brick. Do not use on floors or on walls with active water leaks.
Prime all uncoated, patched, chalky, and adjacent wood and/or metal surfaces with KILZ Premium Primer. For below grade application, fill all holes/cracks with hydraulic cement prior to painting.
This is a 1-gallon can of Interior/Exterior Basement and Masonry Waterproofing Paint, White, 1-gallon in white. Depending on surface porosity, 1 gallon covers 75 to 125 square feet per.
A minimum of two coats of this product are required for optimal results. Paint dries to touch in one hour and can be re-coated in 4 hours depending on humidity.
Apply using a high quality 1/2"-3/4" nap roller, 4" nylon/polyester brush or an airless sprayer capable of delivering 2200-3200 PSI or greater using a .023"-.025" spray tip.
KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings.
SUPERCOAT rolls like paint, wears like steel! If you can paint a wall, you can use SUPERCOAT.
SUPERCOAT’s breathable two-part waterborne epoxy coating system is the hassle-free way to give your garage, basement, patio, dog kennel, storm shelter, wine cellar, rec room, or other special areas a professional, easy to clean, decorative finish.
The kit includes a cleaner/de-greaser for preparing the surface to be coated, the two-part epoxy coating, an anti-slip aggregate to prevent the floor from being to slippery, decorative flakes, a stir-stick, and easy-to-follow instructions.
SUPERCOAT is as easy to apply as paint after minimal surface preparation. Other products require that the surface be acid-etched. If not done properly, acid-etching can harm the concrete floor, surrounding areas, pets and humans. With SUPERCOAT, no acid etching or mechanical prep is necessary in most cases. Clean the surface with the included degreaser, mix, and apply with roller. Scatter flakes in wet epoxy.
After applying the flakes, we recommend using either SUPERCOAT Acrylic Glaze Coat or SUPERCOAT Waterborne Urethane Glaze Coat, both sold separately, to add shine and durability, to protect the decorative flakes, and to make cleaning even easier.
SUPERCOAT is a professional grade floor covering that is far superior to traditional floor paint. Our water-based chemistry forms a unique coating that allows moisture vapor to pass through. Unlike other coatings, SUPERCOAT resists blistering, chipping and peeling
SUPERCOAT is resistant to damage caused by automotive chemicals, such as gasoline, brake fluid, battery acid and standing fluids. It provides protection against hot tire lift, and adheres well to concrete and wood.
Each kit covers 200-250 square feet, and is a partial flake kit. For heavier flake or full coverage flake, contact the manufacturer at (866) 679-7154.
PROTECTIVE FINISH FOR - Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more
HIGHLY FLEXIBLE - Sealant final membrane has over 900% elongation in the sealing material preventing adhesion failure causing cracks and taring. Flat/Ponding Surface: 50 sq ft/G per coat
EASY TO APPLY - No mixing required! Apply by brush, roller or high quality piston paint sprayer. Container can be closed and left over material used later. No pot life or working time like 2 component products
ENVIRONMENTALLY FRIENDLY - Liquid Rubber Foundation Sealant is water based, containing no solvents, VOC's or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur