GM CLIMBING Belay Package. V-grooved Tubular Belay Device: light and compact, smooth rope control, EN 15151-2 and UIAA certified; HMS screw locking carabiner: 25kN breaking strength, large gate opening, both CE UIAA certified
LIGHTEN YOUR RACK! 2.24Oz, an ultra-light, compact and easy-to-use V-grooved belay device with teethed channel, IDEAL CHOICE for you climbers to lighten rack.
BETTER ROPE CONTROL! Whether you use belay device in belaying climbers or rappelling, TEETHED CHANNEL creates more friction in braking and allow device to work with skinnier rope. With minimum force, you can easily arrest the fall of climber promptly.
Double Slots construction, belay device offers effective braking to half, twin and single ropes, 8~11mm.
HMS screw locking carabiner, always a nice match to belay device, which assures safety with locking gate, and helps properly position the system with narrow angle side attached to harness loop.
The lightweight 80 grams Smart 2.0 is easy to operate and has no moving parts or levers.
As it operates according to the tube principle, the Smart 2.0 is therefore suitable for both lead climbing and top rope climbing.
In the event of a fall, the Smart 2.0 blocks the climbing rope, with the newly developed high-performance brake insert interacting with the belay carabiner. It therefore offers the belayer optimal support and significantly improved safety.
Mammut recommends use of the Smart HMS for the Smart 2.0. It is suitable for rope diameters from 8.7 to 10.5 mm.
✅ MATERIAL - Made of 7075 aviation aluminum, our belay device features high strength, good toughness and great portability. The rappel device is smooth and lightweight, useful for your outdoor sports but not increase any burden, portable enough to carry anywhere
✅ FEATURES - V-groove friction plays a slow downward effect by increasing the friction between the ATC and the rope. Double-rope holes can be used with one rope or two rope, and the two ropes will not entangle each other when descending
✅ ROPE COMPATIBILITY – The ATC belay descender is suitable for 8 - 12mm single/double rope, the tensile force is 25KN. Design with 0.4cm rubber wire rope, the guide belay device is easy to store and easy to operate
✅ EXTENSIVE APPLICATIONS - The rappelling device can be easily used with ropes. It’s ideal for outdoor, camping, hiking, setting hammock and tarps or other outdoor activities
✅ NOTE: THIS ITEM IS NOT INTENDED FOR USE AS A MOUNTAINEERING CARABINER!
Keep Your Safety: AOKWIT high-strength ATC V-grooved belay device with teethed channel, reduce the abrasion of the rope when descending, and it is not easy to cause rope winding and knotting. Guarantee the safety of every climbers.
Double-hole Design: Double-row rope hole design, you can used with single or double rope, the double rope will not be entangled when descending, and the rope can be retracted through one end after reaching the destination.
Material: High-strength 7075 aircraft grade aluminum, maximum 25KN(about 2500 kg) tensile strength, light weight(Only 2.1Oz), compact and easy-to-use. GOOD LIGHTEN PACK CHOICE. Anodized coloring, beautiful luster, high visibility in outdoor use.
Labor-saving Equipment: BETTER ROPE CONTROL! Whether you use belay device in belaying climbers or rappelling, TEETHED CHANNEL creates more friction in braking and allow device to work with skinnier rope. With minimum force, you can easily arrest the fall of climber promptly.
It Applies To: Suitable for Mountain Climbing, Rock Climbing, Tree Climbing, Ice Climbing, Rescue, Working-At-Height, Technical Rope Rescue, Climbers, Cavers, Climb Training and Sport Rappelers.