48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity.
Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
Comes with all the components you need to a full conversion, including Front Wheel, Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required.
JAXPETY 48V 1000W Electric Bicycle Cycle E Bike 26" Rear
48V 1500W Powerful brushless gearless motor with 34mph (55km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 551LB / 250KG Max Load Capacity.
Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Cable Ties & Plastic Coil, Wire Hub, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah is required.
AW 26"x1.75" Front Wheel Electric Bicycle Motor Kit 48V 1000W
1000W 48V 26" Electric Bicycle Front Hub Conversion Kit, fit for 3 15/16" front dropout spacing, with a speed of 28 mile/h (45 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working ).
LCD for Data Display - Shows battery condition, speed, distance, PAS, trip time and error codes for troubleshooting, also cruise and assist promotion function can be turned on by operating the LCD display.
Pedal Assist Sensor - To sense your pedal cadence and accordingly adjust motor turning rate, get power assistant without using throttle, great for a long-distance journey, avoid wrist pain from keep pressing Durable Frame - Aluminum alloy frame for durability and stability.
Convenient to Use - Twist Throttle makes speed control as a breeze Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.
JAXPETY 36V 500W Electric Bicycle Cycle 26" E Bike Front
– 💲 Best Budget Ebike Conversion Kit
[Shipping & Warranty] --- Shipped by DHL, about 7 days deliver to your US address. 1 year warranty and provide technical support & after-sales service in the US. 24-hour online service.
[Conversion Accessories] --- All necessary mounting accessories are included. Please see the packing list image. Notice: Brake levers can be changed to hydraulic and mechanical brake sensor--- search ASIN B07B8KNTYN, if you leave us a message about your requirements. But motors in Prime are only packed with brake levers.
[Easy Installation] --- Can be successfully installed into an electric bicycle in just a few time by only a few tools which can remove the crankset and the center shaft, as well as tools for installing this mid-drive motor.
[Standard JIS] --- Fit a standard JIS 68 - 73 mm bottom bracket (installing extra parts Gaskets as gifts), please see the installation image carefully. Suitable for mountain bike, road bike, commuter bike. This motor maybe can't be installed on fat tire bike. NOT recommended to apply this motor to bikes with carbon fiber frame in case of damaging the frame.
[Two riding mode] --- Electric bikes & pedal bicycle, faster traffic & physical exercise can be achieved at the same time. A not bad choice for cycling enthusiasts and those who do not want too fast traffic to transport or travel. This 750W motor is the medium wattage motor of the Bafang BBS02B series, providing suitable power.
Please ensure you select a specific variant from size and style. By default, the first variant of each option will be selected. Easily convert your bicycle to an e-Bike. Kits are ready to install with aluminum double walled rim and hub motor already attached. All you need to do is to transfer original tire.
Kits include all necessary components for installation; Motor/Wheel, controller, LED display, throttle, brake levers, pedal assist sensor, torque arm, and cable ties. Battery and tire is not included.
Upgrade to LCD Display. It offers battery percentage, speed, total and single trip distance, wattage, PAS levels, headlight switch, and potential error codes for easier troubleshooting.
Continue to pedal: Pedal Assist Sensor (PAS) allows you to ride without throttle response. You may choose to operate your e-Bike either way. Going on a lengthy trip? Avoid uncomfortable wrist positions and simply pedal anytime, anywhere.
We offer a 3 month warranty on all components included in the conversion kit. We provide technical support and hassle-free returns, full refund or replacements. We strive to ensure your satisfaction in our service and products.
Voilamart 26" Rear Wheel Electric Bicycle Conversion Kit
48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity.
LCD display shows battery level and pedal assistance settings; Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual, LCD Meter. (Note: Battery not included)
CE approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required.
AW 26"x1.75" Rear Wheel Electric Bicycle LCD Display Motor Kit
Please ensure you select a specific variant from size and style. By default, the first variant of each option will be selected. Easily convert your bicycle to an e-Bike. Kits are ready to install with aluminum double walled rim and hub motor already attached. All you need to do is to transfer original tire.
Kits include all necessary components for installation; Motor/Wheel, controller, LED display, throttle, brake levers, pedal assist sensor, torque arm, and cable ties. Battery and tire is not included.
Upgrade to LCD Display. It offers battery percentage, speed, total and single trip distance, wattage, PAS levels, headlight switch, and potential error codes for easier troubleshooting.
Continue to pedal: Pedal Assist Sensor (PAS) allows you to ride without throttle response. You may choose to operate your e-Bike either way. Going on a lengthy trip? Avoid uncomfortable wrist positions and simply pedal anytime, anywhere.
We offer a 3 month warranty on all components included in the conversion kit. We provide technical support and hassle-free returns, full refund or replacements. We strive to ensure your satisfaction in our service and products.