TESTING CAPABILITY: Standard 3-Wire and GFCI protected 120Volt AC Outlets. Frequency (Hertz) 60Hz (GFI6302)
GFCI FUNCTION: Tests GFI Outlets and standard outlets that are wired in series with GFCI outlets (multiple outlets in kitchen or bath)
RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 300V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL). 10 ft Drop and 250 lb Crush
Warranty: This product is warranted to be free from defects in materials and workmanship for a period of two years from the date of purchase. This warranty does not cover damage which occurs in shipment or failure which results from alteration, tampering, accident,
Detects the most common wiring problems in standard and GFCI receptacles
Works on GFI outlets and confirms operation of the ground fault protective device
Built to withstand a 6.6-foot (2m) drop
Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
GFCI RECEPTACLE TESTER FEATURES LARGE LCD READOUT. View results instantly without the need to look at a chart to understand results. In addition to a clear LCD readout, bright green and red LEDs illuminate to show correct or faulty wiring
TEST TRIP TIME OF GFCI IN SECONDS. Find out if the trip breaker is functioning and how long it takes to trip
DETECT AND IDENTIFY COMMON WIRING FAULTS. Conditions are Wired Correctly, Open Ground, Open Neutral, Open Hot, Dual Open (Neutral & Ground), Reversed Hot/Ground, and Reversed Hot/Neutral. The Dual Open condition is patent pending
AUTO-HOLD FUNCTION IS CONVENIENT FOR HARD-TO-REACH OUTLETS. Simply remove tester to view the reading
SAFE AND DURABLE TESTER FOR INSPECTIONS IN NORTH AMERICAN 120V OUTLETS. CAT II 135V safety rating and 6.6-foot (2 m) drop protection
SAVE TIME AND MONEY: With 2 popular testers in 1 unit - featuring a non-contact voltage detector on one end and GFCI outlet tester on the other
DURABLE: Hi-Impact Resistant Polycarbonate Housing with soft over-molded rubber grips with a compact ergonomic design
INDUSTRY LEADING: Advanced ground testing circuitry precisely detects the required low resistance values
CIRCUIT SENSING: Non-Contact sensitivity detects 50-600V AC and 50-60Hz
AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection
RATED: 10 ft Drop and 250 lb Crush, CAT Rating III 1000V, C-UL US, CE-Marking and recognized by Occupational Safety Hazards Association (OSHA) as an National Recognized Testing Laboratory (NRTL)
The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects
TESTING CAPABILITY: This Receptacle tester detects the most common wiring faults in standard and GFCI electrical outlets, which is also with the standard 3-Wire and GFCI protected 220 Volt AC Outlets. Capable of detecting the open wiring fault with open ground, open hot, open neutral, reverse polarity, hot/neutral reversed wires.
GFCI FUNCTION: This Electric tester tests GFCI devices by simulating ground fault conditions, which works on GFI outlets and confirms operation of the ground fault protective device. It tests standard outlets that are wired in parallel to GFCI outlets (multiple outlets in kitchen or bath, and outdoor receptacles require GFCI protection). Be careful of using this function on normal receptacles. It may cause house wiring trip.
VOLTAGE DISPLAY: This GFCI tester with LED display helps you to measure the socket voltage and display it clearly in the LCD screen, it is also designed with a compact ergonomic and Hi-Impact Resistant ABS housing, which maintains an above industry standard impact & crush resistant rating.
INSTANT WIRING IDENTIFICATION: The Red LED indicators can be light up clearly for easy visual indication, when activated identify one of the seven common wiring options. An easy to understand chart on the tester helps determine wiring condition in outlet, based on LED lights results.
SAFETY CERTIFICATE & Service: This outlet tester with GFCI conforms to CAT III 300V and CE-Marking, which backed Limited Lifetime Service. 7/24 Customer Service.
TESTING CAPABILITY: Detects the most common wiring problems in standard 110-125V AC outlets. Frequency (Hertz) 65Hz.
GFCI FUNCTION: Works on GFI outlets and confirms the operation of the ground fault protective device. Ensure household electrical safety. Perfect for protecting your security against the risk of electric shock.
7 VISUAL INDICATIONS: Easy to judge: Correct, Open Ground, Open Neutral, Live/Neutral Reverse, Live/Ground Reverse, Open Live & Live Neutral Reverse. Quick and easy to read for ultimate efficiency.
Bright LED Light: The indicator lights will not interfere with each other, you can clearly distinguish which light is on and which light is off. The tester adopts a built-in light so it can also be used in the dark. Easy and fast to read the test result.
SAFETY & SERVICE: Hi-Impact Resistant ABS Housing. Outlet tester with GFCI conforms to CAT II 300V and CE-Marking, which backed Limited Lifetime Service. 7/24 Customer Service.
Warranty: Klein electronic test and measurement devices (and accessories), manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for two years from the date of purchase (unless otherwise noted on
This circuit breaker finder can find the corresponding circuit breaker of any 120V standard electrical outlet quickly, accurately, and automatically
Flashing arrow indicator for easy identification
Strong transmitter reaches distances up to 1000-feet
90 to 120V operation
Microprocessor controlled for more reliable identification
Navigate out top 10 Best Electrical Outlet Testers