10 Best Floor Drill Presses 2024

Gareth Otwell Reviewed by Gareth Otwell | Last Updated:

Shop Fox W1848 Oscillating Floor Drill Press – ⭐ Best Overall Floor Drill Press

W1848 by Shop Fox

  • Weight: 122 pounds
  • Dimensions: 24 x 15 x 63 inches
  • Warranty: 2 Year
Shop Fox W1848 Oscillating Floor Drill Press
  • Motor: 3/4 HP, 110V
  • Swing: 13-3/4"
  • Drill chuck: 1/64"-5/8"
  • Arbor: JT-33
  • Range of speeds: 250-3050 RPM

SHOP FOX W1680 1-Horsepower 17-Inch Floor Model Drill Press

W1680 by Shop Fox

  • Weight: 185 pounds
SHOP FOX W1680 1-Horsepower 17-Inch Floor Model Drill Press
  • Motor size: 1 HP, 1,720 RPM
  • Switch: Toggle type
  • Spindle travel: 3-1/4-inch
  • Accepts 5/8-inch drill chuck
  • Built-in 110V light socket

JET J-2500

354400 by Jet

  • Weight: 167 pounds
  • Dimensions: 54 x 20 x 10.5 inches
  • Warranty: 2-Year
JET J-2500
  • GREATER PRECISION: Enclosed spindle assembly is supported by four permanently-lubricated ball bearings.
  • SAFETY: Extend the telescoping spindle guard as much as needed.
  • ACCURACY: Large 1-7/8" diameter quill travels 3-1/8".
  • CONSISTENCY: Accurate depth stop displays inch/mm and has quick-set bolt for fast, accurate adjustments.
  • SOLID SUPPORT: Large ground steel column and cast iron head.

WEN 4225 8.6-Amp Variable Speed Floor Standing Drill Press

4225 by WEN

  • Dimensions: 25 x 12 x 63 inches
  • Warranty: 2-year warranty, 90-day commercial
WEN 4225 8.6-Amp Variable Speed Floor Standing Drill Press
  • 4-inch stroke makes drilling through 4x4 boards easier than ever
  • Adjust the variable speed anywhere from 280 RPM to 3300 RPM
  • Includes a built-in work light, a precision laser, a 5/8 inch chuck, and onboard chuck key storage
  • 12-inch by 12-inch cast iron work table pivots up to 45 degrees in both directions
  • Backed by a 2-year warranty, a friendly customer service line and a nationwide network of skilled technicians

JET JDP-20MF 20" Drill Press

354170 by Jet

  • Weight: 282 pounds
  • Dimensions: 18.5 x 31.5 x 66 inches
  • Warranty: 2-Year
JET JDP-20MF 20" Drill Press
  • VARIABLE-SPEED: 1-1/2 HP motor has 12 speeds from 150 to 4,200 RPM.
  • REPETITION: 1/2"-diameter external depth stop, with three-nut locking feature, allows for fast adjustments.
  • ACCURACY: Depth stop has a quick-set bolt for fast, accurate adjustments.
  • VISIBILITY: Built-in worklight (bulb not included) provides additional visibility.
  • VERSATILITY: Quick-release crank-operated worktable can tilt +/- 45°.

Klutch Floor Drill Press – 💲 Best Budget Floor Drill Press

2705S058 by Klutch

Klutch Floor Drill Press
  • 5/8in. chuck capacity with 1in. maximum drilling capacity
  • 3 1/4in. vertical stroke
  • 13in. swing adds versatility
  • 45 degree table tilt offers a multitude of drilling angles
  • Depth lock with a ball knob handle for precise adjustments that stay true, hole after hole

JET J-A5816 15-Inch 1-Horsepower 115/230-Volt Single Phase Variable Speed Floor – 👑 Premium Pick

354550 by Jet

  • Weight: 550 pounds
  • Dimensions: 31.5 x 21.5 x 67.5 inches
  • Warranty: 2 Year
JET J-A5816 15-Inch 1-Horsepower 115/230-Volt Single Phase Variable Speed Floor
  • Speeds from 400 to 5000 RPM
  • Handwheel adjustment sets the speeds
  • Large 2-1/4" quill allows greater accuracy
  • 3" Column diameter for maximum head support
  • Full bearing support on quill for maximum spindle stiffness

SHOP FOX W1670 1/2-Horsepower Floor Radial Drill Press

W1670 by Shop Fox

  • Weight: 1 pounds
SHOP FOX W1670 1/2-Horsepower Floor Radial Drill Press
  • Motor: 1/2 HP, 110V, 5A
  • Overall height: Floor model: 64-1/2"
  • Spindle travel: 3-1/4"
  • Number of speeds: 5
  • Drill chuck: 5/8"

YEEZUGO Floor Drill Press Stand Table for Drill Workbench Repair

9282615 by YEEZUGO

  • Weight: 6.61 pounds
  • Dimensions: 7.9 x 7.9 x 7.9 inches
YEEZUGO Floor Drill Press Stand Table for Drill Workbench Repair
  • ✔Original Clamping range:43 mm,and it could be adjusted to be from 38 mm to 43 mm by 3 adapter sleeves that comes with this drill stand.
  • This heavy duty drill stand, with 90 Degree Rotation, can act as a drill press, tool holder and flex shaft holder all in one for applications like drilling, sanding and buffing.. Drill accurate perpendicular and angled holes.
  • by 3 adapter sleeves that comes with this drill stand. ✔Flex shaft tool stand - allows telescopic adjustment to any height between 16 and 29 In. Working stroke:60 mm, Down stroke:60 mm,
  • Copper plug readjustment to confirm the precison and durable.Precise graduation:transparent pointer,spacing fuctuion
  • ✔Sturdy metal base (cast iron)with 4 clamping points - to securely hold work piece.

OEM TOOLS 24992 15" 16-Speed Heavy Duty Floor Drill Press

24992 by OEMTOOLS

  • Dimensions: 10.1 x 20.1 x 56.3 inches
OEM TOOLS 24992 15" 16-Speed Heavy Duty Floor Drill Press
  • Precision manufactured
  • Great value
  • Exceed ANSI standards
  • Distance from spindle to table: 28" Distance from spindle to base: 47"

Similiar Categories