10 Best Hand Impact Drivers 2021

Gareth Otwell Reviewed by Gareth Otwell | Last Updated:

TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set – ⭐ Best Overall Hand Impact Driver

2905 by TEKTON

  • Weight: 1.75 pounds
  • Dimensions: 8 x 3.3 x 2.3 inches
  • Warranty: Always Guaranteed: [email protected]
TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set
  • Instant impact force loosens rusted or frozen screws without damaging them
  • Forward and reverse drive direction
  • Drives included screwdriver bits or any 3/8 in. drive impact socket
  • Comfortable handle with non-slip knurled grip
  • Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements

CRAFTSMAN Hand Impact Driver

CMMT14104 by Craftsman

  • Color: Black Oxide
CRAFTSMAN Hand Impact Driver
  • VERSATILITY: 5 bits for slotted and Phillips fasteners
  • EASE OF USE: Easily loosens frozen/rusted screws, nuts or bolts with the hand impact driver
  • EFFICIENT: Tightens fasteners without stripping
  • DURABILITY: Creates up to 200 foot pounds of torque when struck with a hammer
  • FLEXIBILITY: Loosen and tighten Philips and slotted fasteners, as well as drive 3/8-inch sockets.
  • Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

Lisle 29200 3/8" Hand Impact Tool Set – 💲 Best Budget Hand Impact Driver

29200 by Lisle

  • Weight: 1 pounds
  • Dimensions: 10.3 x 4 x 2 inches
  • Warranty: Limited Lifetime
Lisle 29200 3/8" Hand Impact Tool Set
  • Loosens Rusted, Frozen Nuts, Bolts and Screws.
  • Unique design delivers over 200 ft. lbs. of "Shock Torque."
  • Can be reversed to tighten
  • Can also be used with impact sockets! 3/8" sq. drive with 3/8" drive bit holder; #1, #2, #3, #4 Phillips, and 3/8" straight slot bits

Klein Tools 70220 Impact Driver – 👑 Premium Pick

70220 by Klein Tools

  • Weight: 2.15 pounds
  • Dimensions: 7 x 3 x 3 inches
Klein Tools 70220 Impact Driver
  • Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws
  • Includes 3/8-Inch (10 mm)-square-drive fitting adapter for 5/16-Inch hex bits and four assorted hex screwdriver bits (5/16-Inch (8 mm) and 1/2-Inch (13 mm) regular slotted tip, #2 and # 4 Phillips-tip)
  • Can also be used on 3/8-Inch (10 mm) square-drive impact sockets
  • Internal, spring-loaded, helical design transforms the impact of a hammer blow to up to 200 foot-pounds of shock torque
  • Easily reverses for tightening or loosening screws

AKM 1/2-Inch Drive Hand Manual Reversible Impact Driver Set Extractor-12

akmdriver001 by AKM

AKM 1/2-Inch Drive Hand Manual Reversible Impact Driver Set Extractor-12
  • ♣Convenient 1/2 receiver allows use of any 1/2 bit tip or hex nut driver.
  • ♣Ideal for loosening or removing firmly tightened or rusted screws or bolts.Must have for motorcycle jobs or engine repair.
  • ♣Package included:1pc x Impact Screwdriver.1pc x Impact Screwdriver Adapter.2pcs x "+" Drill Bits PH3.2pcs x "+" Drill Bits PH2.2pcs x "-" Drill Bits SL8.2pcs x "-" Drill Bits SL10.1pc x Screw Extractor #3.1pc x Screw Extractor #4.
  • ♣Come with S2 High Alloy Steel impact grade bits have precision-milled tips for exact fit. The impact driver has Corrosion-Resistant Chrome plated finish and non-slip knurled grip.
  • ♣Number #3 Removes Screws 7/32" to 9/32" (Use 5/32" Drill Bit).Number #4 Removes Screws 9/32" to 3/8" & 1/8" Pipe (Use 1/4" Drill Bit)

KAIFNT K504 Heavy Duty Manual Impact Driver Set

K504 by KAIFNT

  • Dimensions: 10.8 x 16.3 x 3.2 inches
KAIFNT K504 Heavy Duty Manual Impact Driver Set
  • Instant impact force loosens rusted, damaged or frozen screws, bolts or fasteners without damaging them
  • Heavy duty impact driver features forward and reverse function for tightening and loosening
  • The enhanced impact and comfortable ergonomic handle with corrosion-resistant chrome plated finish
  • The set come in a compact, blow-molded case for safe and easy storage
  • Includes 21-piece bits, 2-piece adaprers and a impact driver

Stanley Proto J7099A 13 Piece 3/8" Drive Hand Impact Driver

J7099A by Proto

  • Weight: 2.2 pounds
  • Dimensions: 7.5 x 4.6 x 1.9 inches
Stanley Proto J7099A 13 Piece 3/8" Drive Hand Impact Driver
  • Set Includes: Driver, 10 Bits, 2 Bit Holders and Case
  • Designed to loosen hard to turn bolts and nuts
  • Hand impact driver has heavy-duty spring for added torque
  • The TorquePlus design allows for quick and easy socket engagement to the fastener flats, not the corners
  • Popular interchangeable bits are packaged in plastic blowmolded box for easy storage, Made in USA

Hi-Spec Manual Hand Impact Driver with S2 Shock-Resistant Screw Bits

DT40296-US by Hi-Spec

  • Dimensions: 3.5 x 2.3 x 8.3 inches
Hi-Spec Manual Hand Impact Driver with S2 Shock-Resistant Screw Bits
  • ESSENTIAL TOOL – DON’T BE WITHOUT: Sometimes stuck screws, bolts and other fasteners are impossible to loosen after being corroded and frozen stuck by the elements – trying to force them open using and screw driver can damage fastener heads and cause even bigger problems. This essential impact driver is THE solution to stuck fasteners – multiply the force you can apply to loosen/ tightening fasteners with this must-own tool!
  • TOUGH & READY: A solid construction and solid bits allows you to exert as much force as you need using a hammer or rubber mallet to create the power needed to loosen the stuck fastener. A high carbon steel build is finished with a heat treatment that is highly durable while also preventing rust, with S2 shock-absorbing screw bit inserts that can withstand high levels of force
  • VERSATILE – USE WITH SOCKETS: Screw bits are included for use with loosening/ tightening screws including those found on brake calipers, brake discs and rotor and motorcycle case screws. The bit holder can also be removed to revealed and end that can be used with 1/2” drive sockets that will cover you for a range of bolts for automotive repairs, garage and workshop applications
  • ONE STRIKE – HUGE FORCE: Create huge force into tightening or loosening fasteners with a spring-loaded design that migrates the power exerted into the tool’s tip without any loss of energy. This means that a hammer tap to the butt end of the tool produces enough force to loosen even the stiffest of screws and nuts – less strain for user, faster results!
  • SET INCLUDES: Manual hand impact driver comes safe and secure in a strong blow mold box, with 4 popular sizes of S2 shock resistant screws commonly used with impact driving: Phillips #2 and 3# and Slotted 5/16” and 3/8” sizes. The compact size of the box means that is easily fits inside large tool sets – make sure you are always ready to deal with stuck and stubborn vehicle and outdoor fasteners!

CIGOTU Impact Grade Power Hand Tools Driver Sockets Adapter Extension

by CIGOTU

CIGOTU Impact Grade Power Hand Tools Driver Sockets Adapter Extension
  • ▶【Colorful】:Easy to Choose: Different colour coded rings, clear help quickly pick the right one. Our products belong to the latest upgrades, quality is super good.Christmas Gift for Dad/Father,Husband, Boyfriend, Men,DIY.
  • ▶CR-V and black phosphate finish. Forged with heat treated chrome vanadium steel for superior strength, each adapter with corrosion-resistant black phosphate finish for against rust and corrosion. Detent ball on adapters provides a secure fit into the socket,reduces wear and prevents rounding off at corners,ensuring does not wobble while working.
  • ▶【Multifunction-3Pcs】Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ▶【Purpose-3Pcs】: This adapter set is designed to provide a securely locked in extension to your existing tool. Provides additional length to reach into a multitude of hard to reach spaces. The spring ball lock ensures a tight fit into the driver head to prevent slipping during use. Specifically machined to fit securely into a hand held driver, drill driver or impact wrench.
  • ▶【Wide application-105°Right Angle Drill Driver】Can be connected to the drill, rechargeable drill or manual wrench, extending their reach to inaccessible stenosis , twisting screws, nut and more【Features】105° designs for tight spaces, extends the power of a cordless screwdriver - 100 in/lbs. torque, 400 RPM.These Tools are Work Great for Light Drilling,Slow Speed/Screw Driving,Like Cordless Drill,Ratchet Hand Screwdriver,etc.

Teng Tools 7 Piece 1/4 Inch Drive Mini Reversible Manual

by Teng Tools

Teng Tools 7 Piece 1/4 Inch Drive Mini Reversible Manual
  • Loosen rusted, damaged or frozen nuts, bolts or fasteners without damaging them
  • Impact driver features forward and reverse function for tightening and loosening
  • Driver also has a corrosion-resistant chrome plated finish with a comfortable non-slip knurled grip
  • Driver is one of the smallest on the market and is ideal for use in hard to reach areas
  • Set includes three 1.96 inch/50mm screw extractors (2.5mm to 4mm, 4mm to 6mm, 6mm to 8mm), one 1.96 inch/50mm flat bit (1.0mm x 5.0mm) and two PH bits (PH1, PH2)

Similiar Categories