10 Best Hybrid Table Saws 2024

SKIL 15 Amp 10 Inch Table Saw – ⭐ Best Overall Hybrid Table Saw

TS6307-00 by Skil

• Warranty: 3 Year Limited Warranty

• RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
• INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
• PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
• 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
• 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
• DUST PORT ELBOW – Redirects dust to a container for easy cleanup

JET JPS-10 115V 30" ProShop Table Saw with Steel Wings

725004K by Jet

• Color: White
• Weight: 235.7 pounds
• Dimensions: 60 x 40 x 43 inches
• Warranty: 5 Year

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

Shop Fox W1837 10" 2 hp Open-Stand Hybrid Table Saw – 👑 Premium Pick

W1837 by Shop Fox

• Weight: 260 pounds
• Dimensions: 58 x 38 x 36 inches

• 2 HP, 120V/240V, single-phase motor prewired to run on a 120V, 20A circuit
• Enclosed cabinet bottom with 4" dust port
• Precision-ground cast iron table with steel wings measures 401/4" x 27"
• Rip capacity: 30" to right, 15" to left
• Lift-off fence with front/rear locking ability

Or1More Sears Craftsman Arbor Bearings Set of 2 10" Hybrid – 💲 Best Budget Hybrid Table Saw

07061.00 by Or1More

• Bearings are 20mm ID, 40mm OD, and 12mm wide.
• Fits Craftsman10" Hybrid Table Saw model 351.221160
• Replaces Craftsman part number: 07061.00
• These bearings are for saw arbor NOT the motor.

DEWALT 10-Inch Table Saw

DWE7491RS by DEWALT

• Color: Yellow/Black/Silver Table saw/stand
• Weight: 90 pounds
• Dimensions: 31 x 24.5 x 31 inches
• Warranty: 3 year limited manufacturer warranty

• Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
• Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado – 13/16” | Arbor size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Rolling stand designed for easy set up and breakdown with excellent stability
• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

Delta 36-6023 10 Inch Table Saw with 32.5 Inch Rip

36-6023 by Delta

• Warranty: 5 Year Professional Warranty

• Powerful 15 Amp Contractor Grade motor easily handles treated lumber and hardwoods
• 32. 5 Inch Rip Capacity handles large stock and 13/16 in. X 8 in. STACKED DADO CAPACITY
• Durable rack and pinion fence rails make fence adjustments fast, smooth, and accurate
• Professional Grade 5-Year Warranty

BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand

4100XC-10 by Bosch

• Weight: 94 pounds
• Dimensions: 27 x 32.5 x 13 inches

• Powerful table saw – has 15-Amp saw with 4. 0 max HP and 3, 650 rpm, for rip-cutting and cross-cutting of fine and rough materials
• Dimensions: 32.5" D x 27" L x 13" H | Product Weight: 94 lb
• Saves space: Large cast aluminum top provides increased work space and material support with a 25 inch. Ripping capacity to cover all typical job site rip cutting widths
• Portability: Works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy job site mobility, with single action setup and take down
• Protection: Smart guard system contains riving knife and Anti Kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• Soft start circuitry: Manages the intensity of motor start up and minimizes the possibility of tripping a circuit breaker

DEWALT Sliding Compound Miter Saw

DWS779 by DEWALT

• Release date: 10/01/2016
• Color: Silver Miter saw
• Weight: 56 pounds
• Dimensions: 21 x 17 x 17 inches
• Warranty: 3 year limited warranty

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 pounds; Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by Dewalt's 3 year limited warranty

Rousseau 2780 Table Saw Stand for Smaller Portable Saws (REPLACES:

2780 by Rousseau

• Weight: 57 pounds
• Dimensions: 50 x 29 x 5 inches
• Warranty: Limited Lifetime

• Fits Smaller Portable Saws: Dewalt DWE 7480, DW745, Bosch GTS1031, Skil SPT70WT-22, Makita 2703
• Increase rip capacity to 27”
• Includes T-Style locking fence for accuracy
• Micro Adjust Assembly for Quick & Accurate Saw Positioning
• Optional accessories include: Model 2720 Outfeed Table, Model 2780-EXT Extension Table, Model 2780-RXT Router Extension Table. Adjustable Hairline Indicator

Power Tools Stand

SS01 by TACKLIFE

• Color: Black
• Weight: 36.6 pounds
• Dimensions: 67.3 x 23.6 x 32.3 inches

• ☘【MULTI-FUNCTION WORK TABLE & FIXED TOOLS】-Tacklife saw stand is designed to accommodate any power tools, such as miter saw, band saw, table saw, scroll saw and ect.. And the power tool stand can be used as a large work table surface for cutting, sanding, painting, and any others. Besides, there are many holes on the table surface to fix the machines.
• ☘【6-LEVEL HEIGHT ADJUSTMENT & SUPPORT 500LB】-Tacklife saw stand is designed with 6-level height adjustment up to 36-1/5'' (MAX HEIGHT). And there is a roller on each side, which is also able to increase the height of 5''. Tacklife power tool stand can withstand up to 500 pounds with the anti-rust coating & durable iron skeleton frame.
• ☘【ROLLER & END STOPS】-The rollers at both ends of the stand can reduce the friction when sliding the cutting material, and the End stops can help you fix the cut material.And can be fixed at any position to suit the length of the cut material. In addition, tacklife power tool stand also can be used as the measuring tools, which can cut the same length when using the end stops on the same position.
• ☘【FODING & EASY TO CARRY】- Tacklife saw stand can be quickly assembled and folded without any tools. Weighing just 36.6 pounds, it can be carried around the workplace effortlessly. The folding size is 30.31 inches x 21.26 inches x 6.69 inches, which can be stored in the back of the car or the cabinet.
• ☘【QUICK INSTALLATION & NON-SLIPPING FEET】- Tacklife saw stand converts in seconds with collapsible legs. There are some detends that pressing them could lock/ unlock for a quick and easy set-up. What’s more, rubber reinforced feet prevent slipping while working.