10 Best Jointers

After analyzing products, scanning reviews, spending more than 36 hours of research and speaking with our test users, we think the PORTER-CABLE PC160JT Variable Speed 6" Jointer is the one of the Best Jointer on the market.

PORTER-CABLE PC160JT Variable Speed 6" Jointer – Best Overall Jointer

PORTER-CABLE PC160JT Variable Speed 6" Jointer
  • Variable 6, 000 to 11, 000 RPM speed range allows the user to select the right speed for the size and hardness of material being cut
  • Two knife cutter head with jack screw knife leveling arrangement for easy replacement and adjustment of knives
  • Built-in cutter head lock facilitates knife replacement and adjustment
  • Extra large table provides ample work support and Surfacing stock up to a full 6" wide
  • Center mounted fence gives needed support throughout the cut for accurate edge jointing

Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer

Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer
  • White finish
  • Pre-finished shelf
  • Ready to install
  • Great for garages, bedrooms, workshops.PT Horsepower (Hp):1.5

Cutech 40160H-CT 6" Bench Top Spiral Cutterhead Jointer

Cutech 40160H-CT 6" Bench Top Spiral Cutterhead Jointer
  • Powerful 10 Amp 120V motor
  • Spiral Cutterhead with 12 HSS Inserts
  • Fence with 90 to 135 Degree Tilt
  • Level adjustable beds

DEWALT DW735X Two-Speed Thickness Planer Package

DEWALT DW735X Two-Speed Thickness Planer Package
  • Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
  • Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
  • Maximum depth of cut 1/8 inch, depth capacity 6 inches, width capacity 13 inches
  • Includes infeed and outfeed tables and an extra set of knives.Drop feed rate to 14 feet/min.Planer Type:Stationary

DEWALT DW682K 6.5 Amp Plate Joiner – Best Budget Jointer

DEWALT DW682K 6.5 Amp Plate Joiner
  • The product is highly durable
  • The product is easy to use
  • Manufactured in China
  • 6.5 Amp, 10,000 rpm motor provides power for working in the hardest woods
  • Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
  • Integral one-piece fence is adjustable and tilts 0-90 degrees
  • Flush cuts can be made at 0 degrees without removing fence
  • 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint; non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work

Cutech 40180H-CT 8" Bench Top Spiral Cutterhead Jointer

Cutech 40180H-CT 8" Bench Top Spiral Cutterhead Jointer
  • Powerful 10 Amp 120V motor
  • Spiral Cutterhead with 16 HSS Inserts
  • Fence with 90 to 135 Degree Tilt
  • Level adjustable beds

WEN 6560 10-Amp 6-Inch Benchtop Jointer with Filter Bag

WEN 6560 10-Amp 6-Inch Benchtop Jointer with Filter Bag
  • Features a spacious 6-1/4 x 28-1/2 inch table and a two-blade 6-1/8 inch Cutterhead
  • 10-amp motor provides up to 20,000 cuts per minute
  • Cast iron base prevents walking and vibration during operation
  • Adjustable 22-3/4 x 4-1/2 inch fence bevels up to 45 degrees in either direction
  • Includes a two-year warranty, dust port, filter bag, push stick and push block

JET

JET
  • Helical insert cutterhead with staggered carbide inserts for a superior finish and quieter cut
  • Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish
  • 4-sided carbide inserts allow for indexing and easy replacement
  • Dual position mountable on/off switch allows for over or under table mounting
  • 2-way tilting fence with positive stops at 45- and 9-degrees

Cutech 40180HC-CT 8" Bench Top Spiral Cutterhead Jointer with Carbide

Cutech 40180HC-CT 8" Bench Top Spiral Cutterhead Jointer with Carbide
  • Powerful 10 Amp 120V motor
  • Spiral Style Cutterhead with 16 Carbide Inserts
  • Fence with 90 to 135 Degree Tilt
  • Level adjustable beds

Jointer Buyers Guide

What makes for a good jointer? For one, it should be able to enhance the wood’s appearance without causing too much tear. However, there are many different types of jointers out there, as such, choosing the right machine can be a difficult task. To assist you with this, our experts have designed a guide on ten of the best jointers in the market today. Use it to find one that will suit your needs best.

1. PORTER-CABLE PC160JT

This is one low-cost jointer that offers exemplary performance. It comes with variable speed setting capabilities that allow you to vary the cutter head-speed from 6000 to 11000 rpm. This enables you to adjust the speed according to size and material of the stock. The PC160JT has a 30-inch-long table and 19.5-inch-long fence. It is also equipped with a 110-volt 2Hp single-phase 10A motor that powers the cutter head which, in turn, has two high-speed steel knives that land up to 22000 cuts per minute.

The Porter-Cable PC160JT is the best option if you are working with a small or tight budget.

2. Cutech 40160H-CT

This jointer was designed to serve both budget-minded amateurs and professionals that have limited shop space. Featuring a spiral type cutter head powered by a 120-volt 10 AMP motor, it will give you a great finish with less tear. Weighing in at only 40 lbs., transporting it to the site should not be a problem.

3. WEN 6560 10-Amp 6-Inch Benchtop Jointer with Filter Bag

This jointer from WEN is designed to benefit hobbyists working in a home garage more than actual professionals. It is designed primarily out of cast iron which allows you the stability and durability to work even with thick hardwood boards. It also allows you to make precise adjustments on the cutter head for better workability.

4. POWERTEC BJ600 Bench Jointer with Built-In Dust Collection, 6-1/8-Inch

This jointer is both durable and sturdy enough to dampen vibrations. It has a unique fence that can be adjusted between 45, 90, and 135 degrees. Additionally, it contains an integrated dust collection system which ensures you do not fill up your garage with sawdust. It also features a 12-month warranty.

5. Grizzly G0725 6 by 28-Inch Benchtop Jointer

This heavy-duty jointer is designed to last a lifetime. Made almost entirely out of durable metal and steel, it weighs in at over 80 lbs and will require some dedicated bench space. Its table is a few inches longer than other jointers’ which gives you some extra space to work with longboards.

Worth mentioning is that its cutter head has a fixed operating speed of 10,000 rpm. It also comes with an integrated dust collection.

6. Jet JJP-8BT 8-Inch Bench Top Jointer/Planer

This machine is a combo unit that offers you the best of jointing and planning worlds. Additionally, it is quite affordable. This combination will allow you to efficiently utilize your space. It is perfect for professionals as well as DIY enthusiasts. The practicality of having both power tools will help keep your workspace functional, and better suited for you.

7. Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer

This machine has a lot to offer. Even though smaller than other jointers, it is almost twice as heavy due to the cast-iron table and fence. This makes it extremely sturdy thus reducing vibrations when it is operating. It offers a high precision level that any woodworker will love.

8. JET - JJ-6HHDX 6-Inch Long Bed Helical Head Jointer

This is a production type jointer made out of high-quality steel which makes it strong and sturdy. It has a large table that is 56 inches long which allows you to work on longboards. Its cutter head is powered by a 1 HP, single-phase, 13 AMP motor which enables you to cut timber up to 6-inches wide. Nevertheless, it weighs over 200 lbs and will require a mobile base.

9. Ridgid JP0610 Planer, 6-1/8-Inch Jointer

This machine has earned itself a reputation at being able to correct any imperfection on lumber and can turn any wart-board flat. It is powered by a 1 HP, 12 AMP motor that can be rewired for 240 volts.

10. DEWALT DW682K 6.5 Amp Plate Joiner

This heavy-duty machine was designed to be used by professionals. As a testament of its high quality, its housing is cast from magnesium. It features a 6.5 Amp, 10000 rpm motor that gives you enough power to cut through the hardest woods. Additionally, its ergonomic design ensures that you finish your project much faster.

The above are ten of the best jointers in the market at the moment. Consider them when you are out to purchase a jointer that will suit your needs best. 


Similiar Categories