This is the most up-to-date version of the Genuine Ford OEM Engine Oil Cooler. Like ALL OEM Oil cooler this oil cooler comes with OEM gaskets & the oil cooler screen. All of our coolers do have the updated extra cooling layer.
If your EOT & ECT have more than a 20-25 degree variation, your oil cooler is on its way out. Replace it before it becomes an issues. If you replace your defective or failing oil cooler with anything other than the OEM Updated Oil Cooler, you are asking for trouble down the road.
This is a new Ford factory oil cooler built by International
2 year unlimited mileage warranty
Compatible with all 2003-2007 Ford 6.0L Powerstroke diesel trucks
Motorcraft FL2016 Oil Filter
– 💲 Best Budget Oil For 6.0 Powerstroke
Two 4 fl. oz. bottles of REV X High Performance Oil Additive in our stiction fix retail box. Will treat up to 12 quarts of oil.
Quiets engine noise while cleaning harmful deposits, varnish and sludge in all engines. Reduces friction by creating a microscopic friction reduction layer on all treated components to reach areas standard oils can not.
Removes stiction, common in HEUI Injectors, without using harmful and dangerous chemical strippers.
Extends the service life of all synthetic, semi-synthetic, and mineral based oils providing a reduction of wear of all treated engine components.
Greatly improves or eliminates cold start issues in all diesel engines.
Archoil AR9100 Oil Additive (16oz) for All Vehicles
🌈[Fitment]:This Oil Cooler Flush Kit replacement for Ford 2003-2010 Diesel,works on EGR cooler equipped and EGR deleted trucks.
🌈[Oil Cooler Flushing] : Using this oil cooler can be Can be re-used over and over - no need for any part of the kit to remain on the vehicle.If the temperature difference exceeds the specification, it is recommended to perform oil cooler flushing to block damage to the engine and fuel system.
🌈[Good Quatity] :Excellent quality Made of high quality aluminum material which is totally corrosion and dust resistant, prevent high oil temperatures which cause expensive fuel system and engine failures.
🌈[Save Money and Time]:by back-flushing your 6.0L oil cooler rather than replacing it.
🌈[About Service]：Durable and Long Lasting Oil Cooler Flush Kit，the customer service period is 1 year.Note: Please check the display pictures to see before purchase.
Oil Cooler Gasket for 2003-2007 Ford 6.0 Powerstroke Diesel F250
Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine.
Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |.
Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle.
OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models with years 03, 04, 05, 06, 07, 08, 09, 10.
Lifetime Warranty - This replacement engine oil cooler kit comes complete with a lifetime warranty. If the part ever fail or break apart simply contact us for a replacement. Save hundreds of dollars off of dealer prices by purchasing this part and taking advantage of our warranty.
Bonbo 6.0 High Pressure Oil Pump IPR Valve Air Test
Perfect Fitment – Work for Ford 6.0L Powerstroke Diesel high pressure oil system.
6.0 IPR Valve Air Test Fitting Tool – Equipped with 1/4" pipe threads to accept standard air fittings. It takes place of the IPR valve and keep the system completely sealed, avoiding any possible leakage.
Oil Rail Adapters – Essential for connecting to the oil rail to test for leaks. It allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air.
Premium Material – Features top high quality solid steel or brass constructed with a slick finish, durable and anti corrosion, repeatedly tested and gradually optimized to ensure its excellent performance and lasting service time.
Satisfaction Guarantee – We are dedicated to offering the best quality product for our valued customers. If you're not satisfied with the kit, simply return it for a full refund in 30 days or get a replacement during 1 year warranty via our customer service. Put us to the test! Click on the "Add to Cart" button NOW and get this amazing product!