Warranty: Tycon Systems Inc. products are warranted against defects in materials and workmanship for a period beginning on the date of original purchase and extending for a period, of at least 1 year to 3 years as specified in the individual product specification s
The EZ-Bridge-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec.
It complies with the 802.11g and n standards to insure interoperability.
The EZ-Bridge-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight.
It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.
Multiple EZ-Bridge-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
CPE028 is an outdoor high power and high-performance 300Mbps CPE, which works at 5G frequency. It supports Point to Point and Point to Multi-Point wireless connection. The transmission speed between 2 bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter.
3KM Transmission distance: 3 km (visible unobstructed environment), actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house.
Low Interference: 5G frequency makes it have better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, better than 2.4 G traditional CPE; it can automatically adjust to the optimal transmission speed according to the actual signal strength and transmission distance.
Easy to Connect: It is manageable through the WEB browser interface. Before accessing, please modify the IP address of the computer to the same network segment as the CPE (192.168.0.XXX), which is very important; then enter the IP address of the CPE in the browser, and enter the account password "admin/admin" to access and set.
Support PoE power supply (50 meters) power supply, easy to install, and save cost, and compliance with 5.8GHz IEEE 802.11a, IEEE 802.11n standard, support CSMA/CA, CSMA/CD, TCP/IP, PPPoE, DHCP, ICMP, NAT protocol.
【What CPE120 is】KuWFi CPE120 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE120 give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance
【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
JOOWIN AC1200 High Power Outdoor Wireless Access Point with Poe
📶【Dual Band and High Transmission】: A dual band outdoor access point can boost your existing wireless coverage with speed of up to 867Mbps on 5GHz, 300Mbps on 2.4GHz. Supports the latest 802.11ac Wi-Fi standard, which is 3 times faster than Wireless-N.
📶【Large Coverage and Stable Connection】: 2*5dBi Omni-Directional antennas provides 360° network coverage, receiving wireless range becomes wider and more stable. Both 2.4G and 5.8G are applied with power amplifier which can improves wireless network reception and transmission function.
📶【Multi-Working Modes & Easy Setup】: The CF-EW72 supports AP/Router/Bridge/Repeater Mode, which can meets your network requirements in different environment. AP mode (Set up as an outdoor wireless access point) is recommended for bigger yard.
📶【Built for Outdoor Wi-Fi Coverage】: IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture. Lightning Protection, Waterproof, Dustproof, Antifreeze, High-Temperature Resistant, Antioxidant, ensures stable connection in harsh outdoor conditions.
📶【Powered by PoE and Flexible Installation】: 802.3af/802.3at/48V PoE Power (PoE Adapter Included) over Ethernet support and simple mounting design allows for flexible deployment and convenient installation. It supports pole or wall mounted.
CPE450 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor wireless bridge CPE with LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit and wireless monitoring simple and professional
300Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible.The transmission speed between 2 bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps.
Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability
Outdoor wireless bridge adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD)，support 24V POE power supply, easy to install and deploy, simplify construction, safe and reliable
Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.
Wireless Bridge Kit
【Product Detail】 Outdoor wireless bridge is design for extend wireless coverage and remote monitoring. Wireless transmission without complex wiring work. It can penetrate walls to transmit signal, with the transmission distance up to 1KM in open space and the transmission rang will be less than 1KM indoor(Depends on the quantity of wall).
【Work with】 Ideal for using with IP camera, compatible with Hikvision/DaHua/Sony/Pansonic/Uniview and more IP camera. Supports 1-1200 megapixel wireless network camera. Stable 1080P surveillance video transimission.
【Point-to-Point Connection】 Support point-to-point connection. Wireless access points will be automatically paired. Plug and play, easy to build the connection. Without complicated installation and setup.
【Feature】 It has good work performance, widely use for indoor and outdoor monitoring. Wireless wifi bridge with LED display, let you know the signal strength. Size: 24cm x 17cm x 6.5cm. Operation Temperature: -5℉-120℉(-20℃-48℃).
【Customer Services】 If any issue, please feel free to contact us and we try our best to help you.
Ubiquiti Nanostation LOCO M5 Outdoor MIMO 11n 5GHz. locoM5 (2
2 UNITS Ubiquiti NanoStation Loco M5, featuring a panel antenna and dual-polarity performance, the NSLOCOM5 is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor.
Ubiquiti NanoStation LocoM5 features the CPE design that expanded the global Wireless ISP industry.
Ubiquiti versatile airOS firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services.
Ubiquiti airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
NanoStation locom5 can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX CPE.