Top 10 Pancake Air Compressors (April 2024)

CRAFTSMAN Air Compressor – ⭐ Best Overall Pancake Air Compressor

CMEC6150K by Craftsman

6 gallon pancake maximizes portability and stored air
Durable, oil free pump for long life and no maintenance
150 max PSI to ensure adequate cut in pressure for a variety of applications
2.6 SCFM @ 90 PSI allows for quick compressor recovery time. Voltage - 120 volt
Easily starts up in cold weather
13 piece accessory kit includes: 25' X 1/4inches Pvc air Hose with coupler and plug assembled, tire chuck with plug, blow gun with plug, tire gauge, blow gun with OSHA safety nozzle, rubber tip, three inflator adaptors
1 year limited warranty, refer to "warranty & support" section below for full details

BTFP02012 by BOSTITCH

Note:Item does not includes hose or gun kit
150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump
High efficiency motor for easy start up in cold weather ; BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]
78.5 dBA** operational noise level for a quiet work environment
High flow regulator and couplers to maximize air tool performance
Long life oil free, maintenance free pump for convenient use

DWFP55126 by DEWALT

165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump. SCFM @ 40 PSI 3.7 SCFM
High efficiency motor for easy start up in cold weather or extension cord application. [14 ga or larger, 50 feet. (15.2 m) or less]
75.5 dBA noise level for a quiet work setting
High flow regulator and couplers to maximize air tool performance
Power Supply 120V, 60Hz, 10 amps., universal motor. The air compressor should be located at least 12 inch away from the wall or other obstructions that will interfere with the flow of air

EC914S by Metabo HPT

MORE PRESSURE: At 200 PSI, this compressor offers 25% greater PSI than a basic pancake compressor
30% MORE AIR FLOW: 4 CFM @ 90 PSI allows for multiple large body nailers to be used on a single compressor
VERSATILITY: Simultaneously runs 2 framing nailers or 2 roofing nailers or 2 siding nailers or 3 finish nailers or 5 brad nailers
PRODUCTIVITY: Consistently drives nails flush with no delay
LIGHTWEIGHT: At only 41 lbs, it is 22% lighter compared to a traditional twin-stack compressor
CAPACITY: 6-gallon tank provides all the air to run a crew
DURABLE: All metal handle outlasts the harshest demands of the jobsite
LOW MAINTENANCE: Oil-free design for essentially no maintenance
AWARDS: 2014-2019 Pro Preferred Brand for pneumatic nailers by Builder & Developer Magazine

MAC100Q by Makita

Quiet Series design at only 58 dB for operator and crew comfort; ideal for indoor use
Runs at a lower RPM (1, 750) resulting in longer motor and pump life
Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments
Oil-free dual-piston pump designed for maintenance-free operation
Lightweight design for increased job site portability

BTFP2KIT by BOSTITCH

BTFP02012 6 gallon 150PSI 2.6SCFM pancake compressor with a high efficiency motor
SB 1850BN 18 GA Brad nailer drives 18GA brad nails from 5/8 inches to 2 inches for a wide variety of applications
SB 1664FN 16 GA Straight Finish nailer drives 1 1/4 to 2 1/2 inch, 16 gauge finish nails
1/4 inches x 25' PVC air hose with fittings

BTFP1KIT by BOSTITCH

BTFP02012 Compressor 150 max PSI 6.0 gallon tank and 2.6 SCFM delivered at 90 PSI pump
SB-1850BN 2" 18 GA brad nailer drives 18GA brad nails from 5/8" to 2" for a wide variety of applications
1/4" x 25' PVC air hose with fittings
High efficiency motor for easy start up in cold weather
78.5 dBA** operational noise level for a quiet work environment

C2002-WK by PORTER-CABLE

Constructed with a pancake style tank for optimal stability
Provides longer air tool performance
Product dimensions: 18.3 x 18 x 19 inches
Includes 13 piece accessory kit. Contains a 6 gallon capacity
150 psi max tank pressure stores more air in the tank for longer tool run times
2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
Air coupler and plug are factory installed on the air hose to save user labor and to prevent leaks
6-gallon pancake-style tank for stability includes water drain valve and rubber feet
Low-amp 120-volt motor starts easily in cold weather or with an extension cord
Equipped with a durable oil-free pump for long life and no maintenance
Shroud, handle, and console cover protect vital components and make unit easier to carry

EC710S by Metabo HPT

COMPRESSOR: 6-Gallon pancake style tank delivers reliable and rugged performance
PSI: 150 PSI of max working pressure for longer run times
RUN MULTIPLE NAILERS: 2.8 CFM delivered at 90 PSI to operate multiple nailers depending on the application
MOTOR: 1-HP oil-free high efficiency motor for reliable startups even in cold weather
PROTECTION: Steel roll cage with rubber grip protects all critical components and provides comfort during transport
QUIET: 73 dB operational noise level ensures a quieter work environment
REGULATOR AND GAUGES: Industrial regulator and gauges allow for easy and accurate PSI adjustments
LIGHTWEIGHT: Only 36.5 lbs and compact for easy transport
QUICK COUPLERS: Two universal quick couplers for fast tool changes
METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT

BTFP3KIT by BOSTITCH

CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor.
BRAD NAILER: The SB-1850BN drives 18-gauge Brad Nails from 5/8" to 2" for a wide variety of applications
STRAIGHT FINISH NAILER: The SB-1664FN drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails.
HEAVY DUTY CROWN STAPLER: The BTFP71875 drives heavy duty 3/8" Crown staples from 1/4" to 9/16"
AIR HOSE: 15-foot, 1/4" x 25' PVC air hose with fittings air hose, and fittings offer plenty of length for maneuverability
WARRANTY: This kit is covered by a 1-year limited warranty for peace of mind