[8-in-1 ATX Power Supply Tester] -- Support test 20-pin IDE / 24-pin IDE / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors
[Aluminum Alloy Enclosure] -- Light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance
[1.8'' LCD Screen] -- Outputted Voltages shows on the 1.8'' LCD Screen, Easy to Read ( The 1.8'' LCD Screen was Powered by 20-pin / 24-pin Connector ), Note: The Product Screen Has a Load of Scratches All Over It？Because The Screen is Easy to Scratch, We Put a Protective Film on It, If You Think It's Not Beautiful, You Can Tear It Off by Yourself
[Beep Alarm] -- When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know
NOTE: The voltage of IDE / SATA / P6 / P8 interface is displayed by the three lights on the left of the power tester. If their voltage is normal, the three groups of lights (+ 12V, + 3.3, + 5V) will be on. If the light is not on, it indicates that the interface line group is faulty
8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector.
Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance.
1.8" LCD screen: The output voltage is displayed on the 1.8" LCD screen, which is easy to read (1.8" LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself.
Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know.
When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V).
The LCD power tester is a powerful power test device. This power tester only needs to be connected to the ATX connector of the power supply to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in liquid crystal to quickly detect the performance of computer power supply.
The LCD displays various parameters such as output voltage and PG. When each parameter exceeds the normal value, the buzzer will sound a warning and the corresponding value will flash.
It can measure the voltage of each group of power supply 3.3V/+5V/+12V/-12V/SB+5V/PG, and also measure the output wire P4/P6/P8/SATA/IDE, external DIE/SATA/P6/P8 is the light Displayed, there is no LCD voltage. Only the 24pin or 20pin will have the LCD voltage.
It has LCD intuitive and accurate display voltage (+/-0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and many test functions. It is the best choice for quickly detecting PC power.
Support 20Pin, 24Pin ATX interface / SATA interface / 4Pin, 8Pin interface / PCI-E graphics card 6Pin interface / floppy drive interface / ATE hard disk interface.