8 Ports Integrated on One SATA Card: With SupaHub 8 port SATA PCIe card, you are able to add 8 SATA III 6Gb/s drives for your desktop. Lenovo and Dell computers block the BIOS interface of any third-party SATA Controller, it may lead to unpredictable compatibility issues or the SATA card can not be read. Lenovo and Dell computer users should be careful when placing an order for SATA controller card.
Built-in Marvell 88SE9215 + JMicron JMB5xx chip, the stability and compatibility of this SATA expansion card have been improved. This PCIe x1 SATA card does not support RAID.
Supports Windows 7/8/10/Ubuntu (not support other Linux, Ubuntu does not need driver). Driver installation is required to avoid issues like "not all ports working" "won't power up" "slot empty". Multiple hard drives requires sufficient power so that to avoid "drop channel" "not working" an so on. Using multiple OS only supports Windows. You must turn off the power before pluging the pcie to sata expansion card into motherboard or removing it.
Compliant with PCI-Express v2.0 specifications, backward compatible with PCI-Express v1.0. For higher speed, motherboard needs to be PCIe 2.0(GEN2, fastest speed 380-450 MB/s) or above, plug the 8 sata controller card into x16 slot. Old motherboard x16 slot probably reach PCIe 2.0 speed, but other slots(x1/4/8) not. Fastest PCIe 1.0 (GEN1) speed with is 200-300 MB/s. Actual speed depends on PCIe bandwidth of motherboard. If all ports are used at the same time, the speed will be slow down.
PCIe x1 interface: This pcie sata controller card is compatible with PCIe x1, x4, x8, x16, not compatible with PCI slot. PRODUCT AFTER-SALES: i) If the product is damaged during delivery, please contact us directly for better response. ii) Buyers without CD-ROM, or the CD doesn’t work, please contact us for driver download link. iii) Please feel free to contact us if you have any question.
Using a ASM1806 PCIe bridge elimate the need for a Port Multiper when combining the Dual Marvell 9215 Chipset allowing to reach maximum bandwidth per port.
Compliant with PCI-Ecpress Specification v2.0 and backwards compatible with PCI-E 1.x
Supports Communication Speeds: 6.0 Gbps, 3.0 Gbps, 1.5 Gbps
Support Native Command Queue (NCQ). Support Hot plug and Hot Swap.
Supports AHCI 1.0 programming interface registers for the SATA controller
Supports SATA III transfer speeds up to 6.0 Gbps; backward compatible with SATA I/II at 1.5/3.0Gbps
Built with Marvell 88SE9230. Supports Hardware RAID 0, 1, 10, and HybridDrive modes (powered by Marvell HyperDuo). Support on-the-fly AES 128/256-bit encryption
Support Port Multiplier FIS-based and Command-based switching
No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later.
High quality. Fully RoHS compliant. Made in Taiwan.